Filter
Top Products
20
be reachable.
Upgrade
When you select one device or multiple devices (of the same model), the “Upgrade”
button will be enabled. Click on it to upgrade the firmware of the selected device(s).
After click on the “Upgrade” button, Installation Wizard will try to connect the
selected device(s). If the authentication is failed, it will popup a dialog to ask for the
correct password and http port number.
The default password is the MAC address of your own FCS-1030, which marks at the
bottom label of each device.
Please enter the MAC address with capital letters.
Device Information
After connected to the selected device, it will display.