Filter
Top Products
12
Mounting the Lens
1. Remove the lens mount cap from the camera.
2. Install the auto-iris lens.
2-1. CS mount type lens
Carefully align the lens mount with the camera
opening, then turn the lens slowly to install it.
2-2. C mount type lens
To allow for flange- back adjustment, install the
C-mount adaptor (option) on the lens mount,
then carefully align the lens mount with the
camera opening and turn the lens slowly to
install it.
3. Connect the lens plug to the lens iris output
connector (LENS) on the side of the camera.
When using lenses from other makers, the plug
shape may not correspond to the terminal on
the camera.
In such a case, remove the original plug and
using a soldering iron, connect a lens iris plug
according to the diagram. (Refer to next page.)
1
2-1
2-2
3
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 12