Filter
Top Products
46
You can manage all of the set up related to the power supply of LG Network
Storage (stand-by function, emergency power, system shutdown).
7
-
7.
System set-up
Power supply management
1. Set-up stand by function
Click on ‘Apply’ button after setting up stand by time you want.
B
If you want to set up stand-by mode after clicking on the start menu, select ‘Enable’,
and if you want to cancel, select ‘Disable’. If you select ‘Enable’, please proceed to the
next step
A
It is a function to minimize the consuming electricity by converting all of the hard disks
of LG Network Storage to be in stand-by mode when there is no data transfer of LG
Network Storage for a certain time period. If you read or write the data of LG Network
Storage on stand-by mode, the hard disk of LG Network Storage becomes activated
and you can operate it normally after 3-15 seconds.
※
It is recommended to set up a stand-by mode if you are often away or do not use
Network Storage for a long time.
When there is no data transfer of LG Network Storage for an assigned period of time,
it converts to power saving mode. You can set up the time at an interval of 30/60/120
minutes.
※