Filter
Top Products
Wireless Connection LED Indicator
11
ENG
BATTERY PACK:
1. Slide the cover off the Battery Pack.
2. Insert 4 x AA Batteries (not included) into the
Battery Pack. Make sure to correctly line up the
Positive (+) and Negative (-) terminals of the
batteries.
Slide the Battery Pack cover back on.
3. Connect the Battery Pack to the Camera. To
turn the Camera ON of OFF, simply connect the
BatteryPack.
NOTE: It is recommended to remove the battery
pack from the camera when not in use.
Wireless Connection LED Indicator
When the Receiver and Camera are connected:
• The Camera will have IR LEDs indicating that there is a connection
• The Wireless receiver Wiresless Indicator LED will be lit
Battery: Connect
the Camera
Battery Adaptor
cable to the
Female Barrel
Power termination
on the camera.
Connect a battery
to the cable.
CAMERA RECEIVER