Filter
Top Products
Wireless Receiver
8
Wireless Receiver
1. Power LED – Indicates the Power state of the
Receiver.
2. Pairing LED – Flashes when the system is
attempting to pair with a Camera (See the Menu for
details on Pairing a Camera Channel).
3. Signal LED – Flashes to indicate the signal quality
4. Receiver Antenna – Connect the Antenna to the
Receiver to receive wireless signals from the
camera(s).
5. USB Port – Currently not in use in this product.
6. AV OUT – Connect the provided AV Cable to the
Receiver. Connect the Audio and Video ends of the
cable to a TV, VCR or other viewing device.
7. DC 9V INPUT – Connection port for the 9V Power
Adaptor (provided with this system). Connect the
Power Adaptor to a power source.
NOTE: It is recommended that the receiver be
connected to a power surge bar to protect the
equipment from damage.
Wireless Receiver Buttons
1. ▲▼◄► Buttons – Press the Up, Down, Left or
Right buttons to navigate in Menu Mode. Use these
buttons to change the image in ZOOM Mode (QVGA
Mode Only).
2. MENU Mode Button – Press the M to enter or exit
Menu Mode.
3. ZOOM Button – Press the ZOOM Button to Zoom
In (QVGA) or Zoom Out.
4. CAM Button – Press the CAM Button to switch to a
different Camera on the Receiver.
4
2
3
1 2 3
5 6 7
4
1
1