Filter
Top Products
English - 41
react.
internal memory.
2. Please make sure if the Capture function is set to
Continuous mode or the time for capture is set to
be long. For the related setting, refer to 7.10 I
would like to capture images of Chapter 7
Descriptions of major functions.
8
The images
outputted from
PC190 are too
bright, dark or
vague.
Press [AUTO TUNE] to automatically adjust to the
optimal brightness and focal length.
9
Unable to record
images
1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or internal
memory.
2. Please confirm the rotation angle. You may not
able to record when the image is rotated by
90°/270°.
10
The operating
steps in the manual
are not applicable
to the machine.
Due to functional upgrade, machine operation
sometimes differs from the instructions in the
manual. Please check if your machine’s Firmware is
the latest version.
1 Please visit Lumens website to check whether the
latest version is available for download.
http://www.lumens.com.tw
2 To verify Firmware version, please refer to 6.2.1
Version query of Chapter 6 Control
Panel/Remote Control and Setting Menu
3 If you still do not know whether it is the latest
version, please consult your distributor.
http://www.lumens.com.tw/tw/support-cf.asp
11
How to release the
locked machine
1. Press [Menu] on Remote Control or Control
Panel to enter the setting menu.
2. Press [] or [] to enter the [Advanced] menu.
3. Press [] to [Lock Down].
4 Press [] or [] to choose [Off], and cancel the
function of setting power-on password.