Filter
Top Products
Installation Method
16
Day&Night Color CCD Camera
17
Day&Night Color CCD Camera
Installation Method
Before mounting a lens, please check whether it is a C-mount or CS-Mount lens.
The back focus is set for the CS-mount lens at the factory.
After removing the protecting cap, attach the lens into the camera by turning
clockwise.
1.Attach the C Mount lens adaptor by turning clockwise
2.Attach the lens to the camera by turning clockwise.
Connect the VIDEO Out jack to the monitor VIDEO in jack
Connect the power plug to a normal, grounded AC/DC outlet
Use AC 24V/300mA or DC 12V/500mA power source.
A heavy lens may disturb the balance with the camera and possibly result in damage.
Don't use lens heavier than 450g.
It is recommended to set the lens ALC mode to Av mode)Average). Pk mode can be
occurred hunting.
Be suer to connect power only after all the installation is complete
Note that power adaptor is not supplied with camera
Use the UL listed, class 2 power transformer of AC 24V adaptor
Ground should be connected to the FGND terminal
DC12V power is non polarity
A heavy lens may disturb the balance with the camera and possibly result in damage.
Don't use lens heavier than 450g.
It is recommended to set the lens ALC mode to Av mode(Average). Pk mode can be
occurred hunting.
Be sure to connect power only after all the installation is complete
Note that power adaptor is not supplied with camera
Use the UL listed, class 2 power transformer of AC 24V adaptor
Ground should be connected to the FGND terminal
DC12V power is non polarity
Installing C/CS-Mount Lens Connecting to Monitor
Connecting to Power
Mounting a CS-Mount Lens
Mounting a C-Mount Lens