Filter
Top Products
Mamiya C330S: Page 12
Winding & Shutter Test Without Film 12
Open the back cover and make sure
that a spool has been inserted into the
take-up spool chamber.
3. By closing the back cover and
turning the film advance crank, the
exposure counter will advance. When
figure 1 appears on the counter, the
crank will be stopped.
Turn the shutter speed ring and align a
desired shutter speed with the index
line. The shutter speed ring must be set
on a click stop position. Turn the
aperture ring and set a desired f/stop to
the index line. The aperture ring may
be set at intermediate click stop
positions.
5. Depress the shutter button and
the shutter will
be released. By
turning the film
advance crank
until it stops the
shutter button
may be
depressed again.
·Depending on
the kind of take-
up spools
(especially in
case of metal
one) the shutter
may not be
cocked by a
single winding.
·When the
shutter speed
ring is set on "B"
(Bulb), the
shutter will
remain open as
long as the
shutter button is
depressed and it
will close as
soon as the
shutter button is
released. This
method is used
for a long
exposure of 2
seconds or more.
<- Prev | Table of Contents | Next ->
file:///E|/c330s/page_12.html [22-10-2003 15:26:34]