Mounting/Removing Lenses
Mounting lens
1. Mounting lens.
Align Lens Alignment Dot “A” with the Camera Alignment
Dot “B”. Insert the lens into the camera body. Then turn
the lens in the direction of the arrow (clockwise) until it
clicks and locks into place.
* Remove the front and rear lens caps. The front
lens cap can be removed by pressing in the tabs
on the right and left with your fingers and pulling
the cap towards you.
The rear lens cap can be removed by rotating it
counterclockwise.
2. Opening the light shield curtain.
To open the light shield curtain, slide the light shield
curtain release lever along to follow the arrow
down and right. This will cause curtain to snap open.
The light shield lever indicator- (a white line) is then
aligned wit
h
* When the light shield curtain is closed, the
shutter cannot be released. When taking a picture,
open the light shield curtain.
11