Filter
Top Products
Taking Photographs
Unloading the film
1. The back cover open.
While pressing the back cover lock button, push the back
cover open/close button, then the back cover will open.
2. Unloading the film.
Push the spool stud releases lever “A” to the right in
order to disengage the spool from the stud.
• Simply push the upper rim of the spool with
your index finger as shown to lift up the other
end of the spool.
• To prepare for another roll, remove the empty
spool from the film chamber, and place it in the
take-up chamber.
• To remove the film before exposing the entire
roll, cap the lens and press the shutter release
button and wind the film onto the take-up spool
frame by frame.
• For unloading method of Panoramic
photographing with 135 mm film, refer to
Instruction Manual for 135 Panorama Adapter
Kit AD701 (sold separately).
3. Seal the unloaded film.
Be careful not to let the roll of exposed film unwind. Be
sure to seal it immediately.
Handling of Exposed Film
• DO NOT remove exposed film from the camera under direct sunlight. Find a shaded area or
turn your back to the sun and shade the camera before you open it.
• Immediately place exposed film in your camera case or a bag, away from sunlight.
27