Filter
Top Products
Taking Photographs
1. Pressing the shutter button.
Press the shutter release button when you have focused
and determined composition.
• Wind the advance lever until it stops.
(Otherwise, a red warning Lamp in the viewfind-
er will signal that it is impossible to press the
shutter release button.)
• Remove the front lens cap.
• Do not advance the film too quickly, as this
might adversely affect film flatness, or frame
spacing.
• While the shutter is functioning do not try to
cock the film advance lever, because the film
will be moved during exposure.
2. After completing the last exposure.
After completing the last exposure, wind the advance
lever several times until the film with its backing paper is
completely wound onto the take-up spool. The advance
lever will become easier to actuate when the film has
been completely wound on the spool.
26