Filter
Top Products
PROBLEM SOUTION
N
othing appears on the screen.
●
Check that the power cord and line connection between the camera and
monitor are properly connected.
●
Check that video cable is connected with the Analog BNC (Yellow).
●
When the camera’s HD-SDI BNC output is directly connected to the
monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input.
●
When the camera’s HD-SDI BNC output is connected to the DVR: Make
sure the DVR supports HD-SDI signal input.
●
HD-SDI output is converted into other format such as DVI and VGA by
using video converter: Make sure the converter’s HD-SDI input format
T
he image on the screen is dim.
●
Is lens stained with dirt? Clean your lens with soft, clean cloth.
●
Set the monitor to the proper condition.
●
If the camera is exposed to very strong light, change the camera position.
●
Re-adjust the back-
T
heimage on the screen is dim, when
t
he LED is on.
●
Check if the LEDs are shaded and reflected by the camera ring,camera base, or other
objects near the camera.
T
heLEDs are reflected over the
d
ome or cover.
●
Check if the LEDs are shaded and reflected by the camera ring,camera base, or other obj
e
cts near the camera.
T
he image on the screen is dark.
●
Adjust the contrast feature of the monitor.
●
If there is an intermediate device, set 75Ω properly; Check the termination.
T
he camera is not working
p
roperly, and the surface of the
c
amera is hot.
●
Check that you have properly connected the camera to an appropriate
power source.
T
he SENS-UP function does not
w
ork.
●
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
T
he Motion Detection function
d
oes not work.
●
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
C
olor is not correct.
●
Check the setting of WHITE BAL SETUP menu .
T
he screen flickers continually.
●
Ensure the camera is not pointing towards the sun.
●
Is the camera framing the sun or other bright light source?
●
If there is an intermediate device, set 75OΩ properly; Check the termination.
●
HD-SDI video may not appear to be normal if distance exceeds the
maximum transferrable distance.
●
When a BNC cable adaptor is used to combine two or more BNC cables
for distributed HD-SDI video transfer, make sure the impedance of the
adaptor is 75Ω. Otherwise, it may cause shorter transfer distance or
broken video transfer.
TROUBLE SHOOTING
1080 HD-SDI Camera 26 1080 HD-SDI Camera27
RESET
Select RESET using the UP or DOWN button.
RESET: Reset the camera settings to the factory defaults.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
You can reset the camera setting using the SET button.