Filter
Top Products
DAY & NIGHT COLOR, B/W
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
COLOR: The picture is always displayed in color.
B/W: The picture is always displayed in black and white.
You can select and adjust BURST, IR SMART, IR LED, and IR PWM.
BURST: Determines whether to transmit the burst signal or not .
IR SMART: Decrease screen saturation of objects within a short range.
LEVEL: Adjust level of the IR SMART function.
AREA: Select the area to activate the IR SMART.
You can select IR SMART area using the UP, DOWN, LEFT or RIGHT button.
IR LED: Enable/Disable IR LEDs.
IR PWM: Adjust the IR LEDs output level.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
DAY & NIGHTIGHT
BURST ON
IR SMART ON
IR LED ON
IR PWM ------40
RETURN RET
IR SMART
LEVEL --------40
AREA
ETURN RET
DAY & NIGHT AUTO, EXT
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
AUTO: The mode is switched to COLOR in a normal environment, but switched
to B/W mode when ambient illumination is low.
You can select and adjust DELAY, D N, and N D using the LEFT or RIGHT button.
DELAY: You can select day/night switching delay time from. (0s ~ 60s)
D N (AGC): Adjust the brightness of the lighting where the mode switch
occurs from day to night.
N D (AGC): Adjust the brightness of the lighting where the mode switch
occurs from night to day.
SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. DAY & NIGHT AUTO
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
DAY & NIGHT AUTO
DELAY ---------5
DN (AGC) --------75
ND (AGC) --------35
RETURN RET
■ EXT function is disabled.
1080 HD-SDI Camera 14 1080 HD-SDI Camera15