Filter
Top Products
Appendix C Touchscreen
© National Instruments Corporation C-5 FPT-1015 User Manual
Configuring the Rotate Function
Follow these steps to configure the rotate function:
1. Install the rotation software package.
2. Choose the rotate function in the software. The calibration screen
appears automatically. Touch the point, and rotation is mapped.
Note The rotate function is disabled if you use monitor mapping.
Tools
Draw This option tests the touchscreen
operation. The display shows touch
location. Click Draw to start. When you
touch the screen with your finger or a
stylus, the drawing screen registers touch
activity such as left, right, up, down, pen
up, and pen down.
Click Clear Screen to clear the drawing.
Advanced Calibration This option enables or disables the
Advanced Calibration Mode on the
Calibration tab.
Right Button Icon This option shows or hides the icon for
switching buttons and lets you select
whether the icon is in the System Tray
or on the desktop.
Right Button Emulation This option enables or disables right
button emulation.
About
The About panel displays information about the PenMount controller and
driver version.