Filter
Top Products
Chapter 2 Message List
187
iSM08036: Disk array=<aaa...a> is overload
[Classification] NOTICE
[Explanation] It indicates that accumulation of statistics information cannot be started due to
the following causes.
(1) There are so many disk array components that statistic information cannot
be collected by specified logging interval.
(2) The disk array is failed.
aaa...a : Disk array name
[Measures] Take an appropriate measure according to the cause:
Measures against Cause (1):
- Specify the automatic logging interval adjustment in the iSM server
environmental definition. This will set the optimal logging interval, avoiding
accumulation start failure.
- You may be able to start statistic information accumulation by decreasing the
display refresh rate of performance monitoring screen or the number of real-time
monitoring items.
Measures against Cause (2):
- Stop monitoring and perform troubleshooting. After troubleshooting, re-start
monitoring and start statistic information accumulation.
iSM08037: Disk array=<aaa...a> is overload
limit=<bbbb> residual=<cccc>
[Classification] NOTICE
[Explanation] It indicates that disk array is overloaded.
aaa...a : Disk array name
bbbb : Upper limit of count for statistic information collection process
(times/minute)
cccc : Number of additional devices allowed for real-time monitoring
[Measures] Addition of real-time monitoring devices is allowed up to cccc. For adding
more devices to be monitored, remove a cause of overloading.