Filter
Top Products
Chapter 2 Message List
352
iSM13513: Volume (<aaa...a>) does not exist in
volume list.
[Classification] ERROR
[Explanation] Specified volume does not exist in the volume list.
If you use the control volume for operation, the specified volume or volume
paired with the specified volume should be accessible from the relevant business
server with the Access Control or other functions.
When operating the remote disk array pair through remote operation, you can
operate the target pairs and volumes on the level accessible from the business
server as well as one level below and above it. Specified pair and volume cannot
be operated during remote operation if the disk array is shutdown or in the freeze
status, if the link path between disk arrays failed, or if the disk array does not
have required functions or product license.
Note that () may or may not be displayed.
aaa...a : Mount point volume name
[Measures] Check the volume and re-execute or re-create a volume list.
Check that specified volume is accessible from the relevant server when using
the control volume for operation.
Check that the disk array and link path statuses are normal when operating the
remote disk array pair through remote operation. Both of the local and remote
disk arrays should have the RemoteDataReplication/DisasterRecovery function
and product license.