Filter
Top Products
148
t
❚❚ Pausing Interval Timer Photography
Interval timer photography can be paused by:
• Pressing the J button between intervals
• Highlighting Start > Pause in the interval timer menu and pressing J
• Turning the camera off and then on again (if desired, the memory card can be
replaced while the camera is off)
• Selecting self-timer (E) or M
UP release mode
To resume shooting:
1 Choose a new starting time.
Choose a new starting time as described on
page 145.
2 Resume shooting.
Highlight Restart and press J.
Note that if
interval timer photography was paused
during shooting, any shots remaining in the
current interval will be canceled.
❚❚ Interrupting Interval Timer Photography
Interval timer shooting will end automatically if the battery is exhausted.
Interval
timer photography can also be ended by:
• Selecting Start > Off in the interval timer menu
• Performing a two button reset (0 131)
• Selecting Reset shooting menu in the shooting menu (0 224)
• Changing bracketing settings (0 133)
• Terminating HDR (0 115) or multiple exposure shooting (0 144)
Normal shooting will resume when interval timer photography ends.
❚❚ No Photograph
The camera will skip the current interval if any of the following situations persist for
eight seconds or more after the interval was due to start: the photograph or
photographs for the previous interval have yet to be taken, the memory buffer is full,
or the camera is unable to focus in AF-S or when single-servo AF is selected in AF-A
(note that the camera focuses again before each shot).
Shooting will resume with the
next interval.