Nikon 1533 Digital Camera User Manual


 
355Technical Notes
❚❚ Vibration Reduction (VR)
AF-S DX NIKKOR 18–55mm f/3.5–5.6G VR II lenses support
vibration reduction (VR), which reduces blur caused by camera
shake, allowing shutter speeds up to 4.0 stops slower than
would otherwise be the case (measured at a focal length of
55 mm with a DX-format camera according to Camera and
Imaging Products Association [CIPA] standards; effects vary with
the photographer and shooting conditions). This increases the
range of shutter speeds available and permits hand-held, tripod-
free photography in a wide range of situations.
To use vibration reduction, slide the
vibration reduction switch to ON.
Vibration reduction is activated when the
shutter-release button is pressed
halfway, reducing the effects of camera
shake on the image in the viewfinder and
simplifying the process of framing the
subject and focusing in both autofocus
and manual focus modes.
When the
camera is panned, vibration reduction
applies only to motion that is not part of
the pan (if the camera is panned
horizontally, for example, vibration reduction will be applied
only to vertical shake), making it much easier to pan the camera
smoothly in a wide arc.
Turn vibration reduction off when the camera is securely
mounted on a tripod, but leave it on if the tripod head is not
secured or when using a monopod.