Filter
Top Products
234
t
❚❚Setup Menu Options
The GPS item in the setup menu contains the options listed below.
• Standby timer: Choose whether or not the exposure meters will
turn off automatically when a GPS unit is attached.
• Position: This item is only available if a GPS device is connected,
when it displays the current latitude, longitude, altitude,
Coordinated Universal Time (UTC), and heading (if supported) as
reported by the GPS device.
• Use GPS to set camera clock: Select Ye s to synchronize the
camera clock with the time reported by the GPS device.
Option Description
Enable
Exposure meters will turn off automatically if no operations
are performed for the period specified in Custom Setting c2
(Standby timer (0 316); to allow the camera time to
acquire GPS data when a GP-1 is connected, the delay is
extended by up to one minute after exposure meters are
activated or the camera is turned on).
This reduces the
drain on the battery.
Disable
Exposure meters will not turn off while a GPS unit is
connected; GPS data will always be recorded.