E27
Reference Section
Continuous Shooting
Change settings to continuous or BSS (best shot selector).
The icon for the current setting is displayed in the monitor when the camera is in shooting
mode (A6). No icon is displayed when Single is selected.
Select A (auto) mode M d button M A tab M Continuous
Option Description
USingle
(default setting)
One picture is taken each time the shutter-release button is pressed.
VContinuous
While the shutter-release button is held all the way down, the camera
captures up to four images at a rate of about 1.2 frames per second (fps)
when Image mode is set to P 4608×3456 (for L26) or i 3648×2736 (for
L25).
DBSS
(best shot
selector)
The “best shot selector” is recommended when shooting with the flash off or
the camera zoomed in, or in other situations in which inadvertent motion
can result in blurred images. When BSS is on, the camera takes up to ten
pictures while the shutter-release button is held down. The sharpest image in
the series is automatically selected and saved.
• BSS is best suited to shooting subjects that are not moving. When
shooting moving subjects or when the composition of the picture
changes while shooting, the desired results may not be achieved.
WMulti-shot 16
Each time the shutter-release button is pressed, the
camera takes 16 shots at a rate of about 30 fps and
arranges them in a single image.
• Image mode is fixed at L (image size: 2560 ×
1920 pixels).
• Digital zoom cannot be used.