Filter
Top Products
53
Contents Index
Shoot View Connect The Setup Menu Technical Notes
Viewing Pictures on TV
Viewing Pictures on TV
To view pictures on a TV, connect the camera using an optional Audio Video Cable EG-CP14
and follow the steps below.
1 Turn the camera off.
2 Connect the A/V cable.
3 Tune the TV to the video channel.
4 Turn the camera on.
Press and hold the c button to turn the
camera on. The camera monitor will remain
off and pictures will be displayed on the TV.
Always turn the camera off
before connecting or
disconnecting the A/V cable.
The edges of images
may not be
visible when viewed on the TV.
If pictures are not displayed on
the TV
, check that the correct
option is selected for
Video
mode
in the setup menu (
A
62).
The controls on the camera
are
used for playback. To view other
pictures, drag a finger left or right
over the monitor, or tap the
monitor to view movies. While the
monitor is in use, the monitor will
turn on and TV playback will be
interrupted; when the monitor is
no longer in use, TV playback will
resume automatically after a short
pause. Note, however, that
volume can only be adjusted
using the controls on the TV.
Yellow White