Nikon 26442 Digital Camera User Manual


 
E23
Reference Section
B If Images Are Not Displayed on the TV
Make sure that TV settings (E84) in the setup menu conforms to the standard used by your TV.
C Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to select images, start and pause
movie playback, switch between full-screen playback mode and four-image thumbnail display, etc.
Set the HDMI device control setting (E84) of TV settings to On (default setting) and then
connect the camera and TV using an HDMI cable.
Aim the remote control at the TV when operating it.