Nikon 26442 Digital Camera User Manual


 
E92
Reference Section
No access.
The camera could not receive the signal from the smart
device. Select Connect to smart device in the Wi-Fi
options menu, and establish the wireless connection
again.
81,
E71
Could not connect.
The camera failed to establish the connection while
receiving the signals from the smart device. Set a
different channel in Channel under Options in the Wi-Fi
options menu, and establish the wireless connection
again.
81,
E71
Wi-Fi connection
terminated.
A cable was connected to the camera while the camera
and smart device were wirelessly connected, the battery
level became low, or the connection was aborted due to
poor connectivity. Disconnect the cable and establish
the wireless connection again.
81,
E71
Lens error
A lens error occurred.
Turn the camera off and then on again. If the error
persists, contact your retailer or Nikon-authorized service
representative.
20
Communications error
An error occurred while communicating with the printer.
Turn the camera off and reconnect the USB cable.
E25
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery, and
turn the camera on. If the error persists, contact your
retailer or Nikon-authorized service representative.
10, 20
Display Cause/Solution
A