Filter
Top Products
F8
Technical Notes and Index
The camera turns off without
warning.
• The camera automatically turns off to save
power (auto off function).
• The camera and battery may not work properly
at low temperatures.
• The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
• The camera turns off if the USB cable
connecting it to a computer or printer is
disconnected. Reconnect the USB cable.
21
F4
–
75, 80, E21
Monitor is blank.
• The camera is off.
• The battery is exhausted.
• The camera has entered standby mode to save
power. Press the power switch, shutter-release
button, A button, c button, or b (e movie-
record) button.
• The flash lamp flashes while the flash is
charging. Wait for the flash to charge.
• The camera and computer are connected via
the USB cable.
• The camera and TV are connected via an audio
video cable.
20
20
21
45
75, 80
75, E 19
Monitor is hard to read.
• Adjust the monitor brightness.
• The monitor is dirty. Clean the monitor.
73, E 62
F6
Date and time of recording
are not correct.
• If the camera clock has not been set, the “Date
not set” indicator flashes during shooting and
movie recording. Images and movies recorded
before the clock is set are dated “00/00/0000
00:00” and “01/01/2014 00:00” respectively. Set
the correct time and date for Time zone and
date in the setup menu.
• The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepieces, and reset as required.
16, 73, E60
Problem Cause/Solution A