Filter
Top Products
Taking Pictures
6
Turn the camera on
Press the power switch until the
power-on lamp lights.
Turn the camera on
Turn the camera on
Select mode
Slide the mode selector to (auto
mode).
1
Auto Power off (Stand-by Mode)
Auto Power off (Stand-by Mode)
If no operations are performed for about fi ve seconds in shooting mode, the
monitor will gradually dim to save power. Full brightness can be restored by
pressing the shutter-release button or operating any of the controls next to the
monitor. If no operations are performed for about a minute, the monitor will
turn off altogether and the camera will enter stand-by mode, further reducing
the drain on the battery. The display can be reactivated by pressing the shutter-
release button halfway. The camera will turn off automatically if no operations
are performed for another three minutes.
See the Guide to Digital Photography for more information on the options
available for auto power off.
2
Turn the camera on