Nikon 85mmf35G Camera Lens User Manual


 
20
Jp
Kr
De
It
Cz
Sk
Ck
Ch
Nl
Ru
Sv
Es
En
Fr
Lens care
Be careful not to allow the CPU contacts 9 to become dirty or
damaged.
If the lens mount rubber gasket 8 is damaged, be sure to visit the
nearest Nikon-authorized service representative for repair.
Clean lens surfaces with a blower brush. To remove dirt and smudges,
use a soft, clean cotton cloth or lens tissue moistened with ethanol
(alcohol) or lens cleaner. Wipe in a circular motion from the center to
the outer edge, taking care not to leave traces or touch other parts of
the lens.
Never use organic solvent such as thinner or benzene to clean the lens,
as this could cause damage, result in a fire, or cause health problems.
NC filters are available to protect the front lens element. The lens hood
also helps to protect the front of the lens.
When storing the lens in its flexible lens pouch, attach both the front
and rear lens caps.
When the lens is mounted on a camera, do not pick up or hold the
camera and lens by the lens hood.
When the lens will not be used for an extended period of time, store it
in a cool, dry place to prevent mold and rust. Be sure to store the lens
away from direct sunlight or chemicals such as camphor or
naphthalene.
Do not get water on the lens or drop it in water as this will cause it to
rust and malfunction.
Reinforced plastic is used for certain parts of the lens. To avoid damage,
never leave the lens in an excessively hot place.
Standard accessories
52mm snap-on Front Lens Cap LC-52
•Rear Lens CapLF-1
Bayonet Hood HB-37
Flexible Lens Pouch CL-1018
Optional accessory
52mm screw-on filters