Filter
Top Products
12
Control buttons
Two-button control function
Press two buttons simultaneously to perform the following operations.
Follow the procedures shown on the flash unit.
a
button
Press to set the flash mode (p. 26).
•Press to adjust the settings in the Custom
Settings mode (p. 52).
•Press to choose the desired settings when
setting the remote flash unit (p. 61).
ZOOM button
Press to change the zoom-head position (p. 40).
•Press to adjust the settings in the Custom
Settings mode (p. 52).
FLASH button
Press to test fire the flash (p. 20).
i
button/
j
button
Press to increase or decrease the values.
•Press to choose the desired settings in
the Custom Settings mode (p. 52).
•Press to adjust the settings when setting
the remote flash unit (p. 61).
ON/OFF button
Press for approx. 0.3 second to turn the power on
or off.
Recalling the underexposure value in the
TTL auto flash mode
Press the
s
and
a
buttons simultaneously to
recall the underexposure value (p. 29).
Resetting the settings to default values
Press the
a
and
b
buttons simultaneously for
approx. 2 seconds to reset all settings, including the
custom settings, to their default settings.
Button lock
Press the
a
and
j
buttons simultaneously for
approx. 1 second to lock the functions of the control
buttons (except the
b
and FLASH buttons) to avoid
accidental malfunction. Press the buttons again to
release the lock.
Switching to Custom Settings
Press the
s
and
j
buttons simultaneously for
approx. 2 seconds to enter the Custom Settings mode
(p. 52).
ZOOM
MODE
MODE
MODEZOOM