Filter
Top Products
110
Error Messages
Technical Notes
WARNING!
MODE DIAL IS
NOT IN THE
PROPER POSITION
Mode dial is positioned
between two modes.
Adjust mode dial to select
desired mode.
6
THIS IMAGE CAN-
NOT BE DELETED
Attempt to delete protected
picture.
Remove protection before
deleting picture.
80
COMMUNICA-
TIONS ERROR
USB cable disconnected or
memory card removed while
pictures are being transferred
to computer.
If error appears in computer
monitor, click
OK
to exit Picture-
Project. Turn camera off, recon-
nect cable or replace memory
card, then turn camera on and
transfer pictures.
13
49-51
USB option set incorrectly.
Turn camera off and discon-
nect cable, then choose new
USB setting in the SET-UP
menu of the camera and
reconnect camera. If error per-
sists, use PictureProject
button to transfer pictures.
49
NO IMAGES
ARE MARKED
FOR TRANSFER
No pictures selected for trans-
fer when I (V) button
pressed to transfer pictures to
computer.
Disconnect camera and select
at least one picture for trans-
fer, then begin transfer
again.
51,
81-82
TRANSFER
ERROR
Error occurred when pictures
were transferred to computer.
Check that camera is con-
nected and that batteries are
fully charged.
12
50
NEW CITY IS IN
THE CURRENT
TIME ZONE
Travel destination is in same
time zone as home location.
No need to specify new time zone
if travel destination is in same
time zone as home location.
91
LENS ERROR
Error has occurred during lens
operation.
Turn camera off and then on
again. If error persists, con-
tact retailer or Nikon repre-
sentative.
13
SYSTEM ERROR
Error has occurred in camera's
internal circuitry.
Turn camera off, unplug
optional AC adapter (if
using), remove and reinsert
batteries, and turn camera
on. If error persists, contact
retailer or Nikon representa-
tive.
8-9,
12
Display Problem Solution Q