Filter
Top Products
111
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in
the monitor, as well as the solutions for dealing with them.
Display Problem Solution c
S (blinks) Clock not set. Set clock. 93
Batteries running low. Ready spare batteries. 10,
105
Warning!!
Battery exhausted
w
Batteries exhausted. Replace batteries.
p (● blinks red) Camera cannot focus. Recompose picture. 20, 21
y (blinks) Slow shutter speed. Pic-
tures may be blurred.
Use flash, or steady cam-
era using tripod, by plac-
ing camera on level
surface, or by holding
camera in both hands
with elbows against
torso.
5, 18,
24
Warning!!
please wait for the
camera to finish
recording
y
Camera cannot perform
other operations until
recording is complete.
Message clears from dis-
play automatically when
recording is complete.
—
Memory card is write
protected
Write-protect switch is in
“lock” position.
Slide write-protect to
“write” position.
15
This card cannot be
used
x
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly
inserted.
106
—
14
Warning!!
This card cannot be
read
O
O
Card is not format-
ted
Format
No
Memory card has not
been formatted for use in
camera.
Highlight [Format] and
press d to format card,
or turn camera off and
replace card.
15