Filter
Top Products
30
Basic Photography and Playback: Auto Mode
Using the Flash
The flash has a range of 0.3–7.5 m (1 ft.–24 ft.) when the camera is zoomed
out all the way. With maximum optical zoom applied, the range is 0.3–4 m
(1 ft.–13 ft.). The following flash modes are available:
1 Press J (flash mode).
The flash menu is displayed.
2 Use the rotary multi selector to choose
the desired flash mode and press d.
The icon for the selected flash mode is displayed at
the top of the monitor.
When [Monitor settings] (c 118) is set to [Auto info],
the icon for the selected flash mode is only displayed
for five seconds after the setting is applied. When set
to [Show info], the z icon will only be displayed for
five seconds after the setting is applied. All other
icons will remain displayed.
The flash mode applied in L (auto) mode and high-
sensitivity shooting mode is stored in the camera’s
memory even after the camera is turned off.
If a setting is not applied by pressing d within five
seconds, the selection will be cancelled.
z Auto (default for L (auto) mode)
Flash fires automatically when lighting is poor.
A Auto with red-eye reduction
Reduces “red-eye” in portraits (c 31).
B Off
Flash will not fire even when lighting is poor.
J Fill flash
Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows
and back-lit subjects.
D Slow sync
Flash illuminates main subject; slow shutter speeds are used to capture back-
ground at night or under dim light.
zz
Flash
88
MM
M
zz