Filter
Top Products
99
Setup Menu
Basic Camera Setup
3 Press K.
The new city time zone menu is displayed.
4 Press J or K to select the travel destination
time zone (city name).
To use the camera in an area where daylight saving time
is in effect, press H to display the W mark at the top of
the monitor and set the daylight saving time. When the
daylight saving time goes into effect, the clock is
automatically advanced one hour. To turn off the daylight
saving time setting, press I.
Press k to enter the travel destination.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
Home time zone
Travel destination
Exit
London, Casablanca
15:30
Time zone
15/05/2010
Back
10:30
-05:00
EDT:
New York
Toronto
Lima
B The Clock Battery
T
he camera’s clock is powered by a clock battery that is independent of the batteries that powers
the camera. The clock battery charges when the main batteries are installed or an AC adapter is
connected, and can provide several days of backup power after about 10 hours of charging.
C w (Home Time Zone)
• To switch to the home time zone, choose w Home in step 2 and press k.
• To change the home time zone, choose w Home in step 2 and perform steps 3 and 4, to set the
home time zone.
C Daylight Saving Time
When the summer saving time begins or ends, turn the daylight saving time option on or off using
the home time zone display in Step 4.
D Imprinting the date on pictures
After setting the date and time, set the Date imprint setting (A103) in the setup menu. Once
Date imprint is set, the shooting date and time can be imprinted on the image data when taking
pictures.