Filter
Top Products
108
Setup Menu
Basic Camera Setup
k Auto Off
When the camera is on and a period of time passes without any operations, the
camera will enter standby mode (A 15) to save power.
Once the camera has entered standby mode, the power-on lamp will blink. If no
operations are performed for another three minutes, the camera will turn off.
Use this option to set time before camera enters standby mode.
Press the d button Mz (Setup menu) (A94) M k Auto off
Auto off
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s (default setting), 1 min, 5 min, and 30 min.
Sleep mode
If On (default setting) is selected, the camera will enter standby mode when there
is no change in the brightness of the subject, even before the time selected in the
auto off menu has elapsed. The camera will enter sleep mode after 30 seconds
when Auto off is set to 1 min or less, or after 1 minute when Auto off is set to
5min or more.
B Notes on Auto Off
T
he time allowed to elapse before the camera enters standby mode is fixed in the following cases:
• While menus are displayed: 3 minutes
• While slide show is in progress: Up to 30 minutes
C Exiting Standby Mode
Press one of the following buttons to exit standby mode.
• Power switch
• Shutter-release button
• A button
• c button
• b (movie-record) button