Filter
Top Products
44
More on Shooting
Capturing Smiling Faces Automatically (Smart Portrait Mode)
The camera detects a smiling face to shoot the face automatically.
1 Press A in shooting mode to
display the shooting-mode
selection menu and use the multi
selector H or I to select F and
press k.
The camera enters smart portrait mode.
2 Frame the picture.
• Raise the built-in flash when using the flash.
• Point the camera at the subject.
• If the camera detects a person’s face, the face is framed
by a double yellow border in the focus area, and when
the face comes into focus, the double border turns
green for a moment and the focus is locked.
• Up to three faces can be detected. When the camera detects more than one face, the
face nearest the center of the screen is framed by a double border in the focus area
and the other faces are framed by a single border.
3 The shutter is automatically released.
• If the camera detects the smiling face of the person framed by a double border, the
shutter is automatically released.
• The self-timer lamp (A 4) blinks when the camera detects a face, and it flickers
immediately after the shutter is released. Each time the shutter is released, the camera
again begins face detection and smile detection operations for continuous automatic
shooting.
• Pictures can also be taken by pressing the shutter-release button. If the camera does
not detect any faces, the camera focuses on the subject in the center of the frame.
4 Exit smart portrait mode by pressing A.
Change to another shooting mode.
Smart portrait
F3.5
1/125
1/125
F3.5