Filter
Top Products
119
Setup Menu
Basic Camera Setup
TV Settings
Adjust settings for connection to a television.
D HDMI and HDMI-CEC
HDMI (High-Definition Multimedia Interface) is a multimedia interface. HDMI-CEC (HDMI-Consumer
Electronics Control) allows compatible devices to inter-operate.
Blink Warning
Set whether or not to detect human subjects with eyes closed when taking
pictures using face detection (A 24) in the following situations.
• G (Easy auto) mode
• Portrait (A 36) or Night portrait (A 37) scene modes
d button M z (Setup menu) (A104) M TV settings
Video mode
Choose from NTSC and PAL.
HDMI
Select the HDMI output image resolution from Auto (default setting), 480p, 720p,
and 1080i. When set to Auto, the resolution is automatically set to 480p, 720p, or
1080i according to high-definition television that is connected to the camera.
HDMI device control
Select whether or not the camera can receive signals from the TV when it is
connected to an HDMI-CEC compatible television via an HDMI cable. When this is
set to On (default setting), a TV remote control can be used to control the camera
during playback. ➝ “Using a TV Remote Control (HDMI Device Control)” (A 91)
d button M z (Setup menu) (A104) M Blink warning
On
When the camera detects that one or more human subjects have closed their eyes
shortly after detecting the faces and shooting them, the Did someone blink?
screen will be displayed in the monitor. The face of the human subject that may
have closed his/her eyes is framed by a yellow border. In such a case, you can
check the captured image and determine if you take the picture again.
➝ “Operating the Did someone blink? Screen” (A120)
Off (default setting)
Blink warning is disabled.