Filter
Top Products
21
Step 1 Turn the Camera On and Select G (Easy Auto) Mode
Basic Photography and Playback: G Easy Auto Mode
Indicators Displayed in G (Easy auto) Mode
• The indicators and photo info displayed during shooting and playback will turn
off after a few seconds (A 110).
• When the monitor has turned off in standby mode to save power (the power-
on lamp is blinking) (A 116), press the following buttons to turn it back on.
➝ Power switch, shutter-release button, A button, or b (e movie-record) button
30
30
Shooting mode
In easy auto mode, the camera
automatically selects U, e, f, g,
h, i, or j mode according to the
current subject and framing.
Internal memory indicator
Images will be saved to
internal memory
(approximately 102 MB).
When a memory card is
inserted, C is not displayed
and images will be saved to
memory card.
Image mode
Display image size and quality (compression) set in
the image mode menu. The default setting is
k4320×3240.
Motion detection icon
Reduce the blurring caused by subject
movement or camera shake.
Vibration reduction icon
Reduce the effects of
camera shake.
Movie options
Displays the movie setting
used when recording
movies (A 79, 84).
C Functions Available in Easy Auto Mode
• When the camera is pointed at a person’s face, the camera automatically detects the face and
focuses on it (A24, 34).
• The self-timer (A31) and exposure compensation (A 32) are available.
• The macro mode button (A11, 51) on the multi selector is not available. Changes to macro
mode when the camera selects close-up scene mode.
• Press the d button to change the combination of image quality (compression) and image size
in Image mode (A 53).
C Note on the Flash
When the flash is lowered, the flash setting is fixed at off and W is displayed at the top of the
monitor. In situations where flash is needed, such as in dark locations or when the subject is backlit,
be sure to raise the flash by hand (A 7, 28).
D Notes on Vibration Reduction and Motion Detection
• See Vibration reduction (A113) or Motion detection (A114) in the setup menu (A 103)
for more information.
• Set Vibration reduction to Off when using a tripod.