Filter
Top Products
E7
Using Panorama Assist
Reference Section
5 Take the next picture.
• Frame the next picture so that one-
third of the frame overlaps the
previous picture.
• Repeat this process until the
necessary number of pictures have
been taken to complete the scene.
6 Tap H when shooting is completed.
• The camera returns to step 3.
B Notes on Panorama Assist
• Apply the flash mode, self-timer, macro mode, and exposure compensation settings before
releasing the shutter for the first picture. Shooting settings cannot be changed after the first
picture is taken. Image mode (A 62) and Touch shooting (E 49) settings cannot be changed
and pictures cannot be zoomed or deleted until the series is finalized.
• The panorama series is terminated if the camera enters standby mode with the auto off function
(E 88) during shooting. Setting the time allowed to elapse before the auto off function is
enabled to a longer setting is recommended.
C R Indicator
In Panorama assist scene mode, exposure, white
balance, and focus for all pictures in a panorama are fixed
at the values for the first picture in each series.
When the first picture is taken, R is displayed to
indicate that exposure, white balance, and focus are
locked.
C Panorama Creation with Panorama Maker 5
• Transfer a series of pictures taken in Panorama assist scene mode to a computer (A 78) and
create a single panorama photo with Panorama Maker 5.
• Panorama Maker 5 can be installed on a computer using the included ViewNX 2 Installer CD (A 76).
• After installation is complete, follow the procedure described below to start Panorama Maker 5.
Windows
Choose Start menu > All Programs > ArcSoft Panorama Maker 5 > Panorama Maker 5.
Mac OS X
Open Applications and double-click the Panorama Maker 5 icon.
• For more information on using Panorama Maker 5, refer to the on-screen instructions and help
information contained in Panorama Maker 5.
C More Information
See “File and Folder Names” (E 98) for more information.