Nikon COOLPIXS80BK Camcorder User Manual


 
155
The Setup Menu
Basic Camera Setup
i Sound Settings
Adjust the following sound settings.
k Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (A 19) to save power.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
Press the shutter-release button to cancel standby mode.
C Notes on Auto Off
Regardless of the option selected, the monitor will remain on as follows:
When a setting screen is displayed: three minutes
During slide show playback: up to 30 minutes
Tap the bottom tab (A146) M z (Setup menu) M i Sound settings
Button sound
Turn button sound On (default setting) or Off. When On (default setting) is
selected, beep will sound once when operations are completed successfully, twice
when the camera acquires focus on the subject, and three times when an error is
detected. Start-up sound will also play when the camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.
No sound is played with shutter release when some features such as continuous
shooting or BSS (best shot selector) are enabled, or when recording movies, even if
On is selected.
Tap the bottom tab (A146) M z (Setup menu) M k Auto off