Filter
Top Products
160
The Setup Menu
Basic Camera Setup
Operating the Blink Warning Screen
When the blink warning screen shown at
right is displayed in the monitor, the
operations described below are available.
If no operations are performed within a few
seconds, the camera automatically returns to
shooting mode.
B Note on Blink Warning
Blink detection does not function at continuous settings of Continuous, BSS, or Multi-shot 16.
To Tap Description
Enlarge the detected
face that blinked
n
Tap n.
If the camera detects that more than one human
subject blinked, tap M or N to switch display to
another face.
Switch to full-frame
playback
o
Tap o.
Delete pictures
E
Tap E.
Switch to shooting
mode
I
Tap the monitor or tap I or H. The shutter-release
button can also be pressed to return to shooting
mode.
H
Did someone blink?