Nikon CT3A03(11) / 6MN15911-03 Camcorder User Manual


 
17
The Basics of Shooting and Playback
C Changing the Language Setting and the Date and Time Setting
You can change these settings using the Language (E57) and Time zone and date (E44)
settings in the zsetup menu (A82).
You can enable and disable daylight saving time by selecting the z setup menu > Time zone
and date (E44) > Time zone. When enabled, the clock moves forward one hour; when
disabled, the clock moves back one hour. When the travel destination (x) is selected, the time
difference between the travel destination and the home time zone (w) is automatically calculated
and the date and time in the selected region are saved at the time of shooting.
If you exit without setting the date and time, O flashes when the shooting screen is displayed. Use
the Time zone and date setting in the setup menu to set the date and time (A 82, E44).
C The Clock Battery
The camera’s clock is powered by an internal backup battery. The backup battery is charged when
the main batteries are inserted into the camera or when the camera is connected to an optional
AC adapter, and can provide several days of backup power after about 10 hours of charging.
If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed
when the camera is turned on. Set the date and time again. Step 3 of “Preparation 3 Set the
Display Language, Date, and Time” (A14)
C Imprinting the Shooting Date in Printed Images
Set the date and time before shooting.
You can permanently imprint the shooting date in images as they are captured by setting Print
date (E49) in the setup menu (A82).
If you want the shooting date to be printed without using the Print date setting, print using the
ViewNX 2 software (A67).