Nikon D3000 Film Camera User Manual


 
184
n
This card is not formatted.
Format card?
T
(blinks)
Format card or turn camera off and insert new
memory card.
21
Card is full
j
(blinks)
Reduce quality or size. 50
Delete photographs. 33,
101
Insert new memory card. 20
(blinks)
Camera can not focus using autofocus.
Change
composition or focus manually.
28,
42, 48
Subject is too bright. q
Use a lower ISO sensitivity 62
Use commercial ND filter
In mode:
S Increase shutter speed 69
A Choose a smaller aperture (larger f-number) 70
Subject is too dark. r
Use a higher ISO sensitivity 62
Use flash 58
In mode:
S Lower shutter speed 69
A Choose a larger aperture (smaller f-number) 70
No Bulb in S mode.
A
(blinks)
Change shutter speed or select manual exposure
mode.
69, 71
&
(blinks)
N
(blinks)
Flash has fired at full power.
Check photo in
monitor; if underexposed, adjust settings and try
again.
Flash is in TTL mode. Choose
another setting or use a CPU
lens.
Change flash mode setting on optional flash unit
or use CPU lens.
157
N/s
(blinks)
Use the flash. 58
Change distance to subject, aperture, flash
range, or ISO sensitivity.
61,
62, 70
Optional SB-400 flash unit attached: flash is in
bounce position or focus distance is very short.
Continue shooting; if necessary, increase focus
distance to prevent shadows from appearing in
photograph.
Flash error
Error occurred updating firmware for optional
flash unit. Contact Nikon-authorized service
representative.
Indicator
Solution 0Monitor Viewfinder