Filter
Top Products
71
t
Mode M (Manual)
In manual exposure mode, you control both shutter speed and aperture.
To take
photographs in manual exposure mode:
1 Rotate the mode dial to M.
2 Choose aperture and shutter speed.
Checking the exposure indicator (see below), adjust shutter speed and
aperture.
Shutter speed is selected by rotating the command dial: choose from
values between 30 s and
1
/4,000 s or select “bulb” to hold the shutter open
indefinitely for a long time-exposure (0 72).
Aperture is selected by pressing
the N (E) button and rotating the command dial: choose from values between
the minimum and maximum for the lens.
Shutter speed and aperture are
shown in the viewfinder and information display.
3 Frame a photograph, focus, and shoot.
Shutter speed Aperture
Command
dial
N(E) button Command
dial
A The Exposure Indicator
If a CPU lens is attached and a shutter speed other than “bulb” or “time“ is selected, the
exposure indicator in the viewfinder and information display shows whether the
photograph would be under- or over-exposed at current settings.
If the limits of the
exposure metering system are exceeded, the indicator will flash.
Optimal exposure Underexposed by
1
/3EV Overexposed by over 2 EV
Mode dial