Filter
Top Products
Reference: Connecting to a Computer, Printer, or TV/Connecting to a Computer 55
Connecting to a Computer, Printer, or TV
Connecting to a Computer
The camera can be connected to a computer using the supplied USB cable. The supplied
PictureProject software can then be used to copy photographs to the computer, where
they can be organized, retouched, and printed.
Before Connecting the Camera
Install PictureProject from the supplied installer CD. To ensure that data transfer is not inter-
rupted, be sure the camera battery is fully charged. If in doubt, charge the battery before
connecting the camera or use an optional EH-5 AC adapter and EP-5 AC adapter connector
( 103).
Before connecting the camera, select the USB item in the camera
setup menu and choose a USB option as described below.
* See the websites listed on page x for the latest information on supported operating systems.
†Do NOT select MTP/PTP. If MTP/PTP is selected when the camera is connected, the Windows hard-
ware wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera and
select Mass Storage.
Connecting the USB Cable
Computer operating system
*
USB
Windows Vista (32-bit Home Basic/Home Pre-
mium/Business/Enterprise/Ultimate editions)
Windows XP (Home Edition/Professional)
Choose MTP/PTP or
Mass Storage
Mac OS X version 10.3.9 or 10.4.x
Windows 2000 Professional Choose Mass Storage
†
1
Turn the computer on and wait for it to start up.
2
Turn the camera off.
3
Connect the supplied USB cable as shown. Do not use force or attempt to insert the
connectors at an angle. Connect the camera directly to the computer; do not connect
the cable via a USB hub or keyboard.