Filter
Top Products
12
Power Connection
Connect the cable from the battery plate with
the battery input (F) and load battery in the
plate. The Connecting Kit uses the same
battery type as the camera.
LANC & Remote Control with the
Mini35Digital
The Mini35 can also be controlled via a
remote control unit. Use the LANC cable to
connect the Mini35 via the INPUT connection
(M) with the camera. Then connect the Mini35
via the REMOTE connection (L) with the
remote control unit.
7-pin LANC Cable
Red connector – Canon & Sony
Black connector - Panasonic
Canon XL1/XL1S
Sony DSR-PD150 / DCR-VX1000 /
DCR VX2000
The Mini35 can now be controlled:
• Independent & manually by the Mini35
RUN button or
• Both manually via the camera START
button or
• Together via a Remote Control System
Panasonic AG-DVX100
The camera has no LANC interface and can
only receive commands. So both can be
controlled
• Independent & manually by the Mini35
RUN button or
• Together via a Remote Control System