Filter
Top Products
33
6 Attach the camera support:
Slide the camera support bracket under the
camera and attach the knob (f) to the bottom
of the camera:
Lock the lever-knob (e) at the back of the
camera support and lock the screws at the
bottom of the camera support
a. The big knurled knob (f) through the
camera platform has to line up with the ¼”
threaded hole on the camera bottom.
b. Start engaging the thread of the knob in
the thread of the camera but do not tighten
it yet.
c. Release the lever-knob (e) at the back of
the platform to allow the spring-loaded pad
(d) to come in contact with the base of the
camera.
d. Finish tightening the knob (f) at the bottom
of the platform.
P
A
N
A
S
O
N
I
C