Filter
Top Products
mSKmm
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Lens hood screw
Tripod collar alignment scale
(four marks)
Tripod collar alignment index
Preset-focus ring
Focusing ring
Distance scale
Depth-of-field indicators
Distance index
Infrared compensation index
Filter holder mounting index
Glass filter holder
Filter holder knob
Shoulder strap eyelets
Aperture index
Extension lens hood HE-3
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Built-in lens hood
Tripod collar lock screw
Preset-focus ring lock screw
Tripod sockets
Built-in rotating tripod collar
Tripod socket position guides
Aperture scale
Aperture ring
EE servo coupling post
Aperture indexing post
Aperture-direct-readout scale
Meter coupling shoe
Meter coupling ridge
Gelatine filter holder plate
Gelatine filter holder
Thank you for your kind patronage of Nikon.
Before using your new lens, read the following carefully so you get the most out of
your lens now and for years to come.
MOUNTING THE LENS A
To mount, position the lens in the camera's bayonet mount, lining up the aperture
index on the lens with the lens mounting index on the camera. Twist the camera body
clockwise until it clicks into place.
To remove, press the lens release button on the camera and turn the camera body
counterclockwise. For details, refer to the camera's instruction manual.
FOCUSING
Turn the focusing ring until the image in the viewfinder appears sharp and crisp. The
effective focal length may vary in extreme heat or cold. To compensate for this, turn
the lens focusing ring slightly beyond the °° (infinity) position.
Preset Focusing B
When you want to refocus rapidly to a specific object distance, preset the focused
distance.
1.
Loosen the preset-focus ring lock screw and turn the ring in either direction until it
clicks.
2.
Turn the focusing ring to set the desired distance.
3.
Tighten the preset-focus ring lock screw.
It is possible to focus/refocus by turning either the preset-focus ring or focusing ring.
12