Filter
Top Products
13
Engage the film’s perforations
with the sprocket teeth. Turn
the takeup spool slightly with your
thumb, so that the first or second
perforation at the bottom edge of the
film s engaged with the small tooth at
the bottom of the slot in the takeout
spool, and the top and bottom
perforations mesh securely with the
sprockets
4.
Advance the film by rotating the takeup spool further with your thumb. Make
sure the perforations on both film edges are securely engaged with the
sprocket teeth. Also confirm that the film is properly seated between both film guide
rails and there is no film slack Then close the camera back until it snaps shut.
2.
29
35
WWW.LENSINC.NET / WWW.CAMERA-FIX.COM