Filter
Top Products
36
BASIC OPERATION continued
TAKING PICTURES
Trip the shutter by pushing the shutter release button all the way
down; apply light but steady pressure with the ball of your index
finger to avoid camera shake which might result in blurred
Images.
The shutter re ease button is threaded in its center to accept a
standard cable release for tripping the shutter with the camera
mounted on a tripod.
• The shutter cannot be tripped unless : a) the film advance lever
is pulled out to standard position, b) the film advance lever is
stroked completely to cock the shutter and c) the batteries are
in proper working order. To release the shutter when the
batteries are dead use a mechanical setting of M250 or B
• When using a tripod be careful not to screw it into the cameras
tripod socket too tightly, as this might damage the camera
Also if the tripod has a large head, contact between the lens
barrel and the head may make it impossible to turn the lens
aperture ring In this case use the special tripod adapter
(supplied with the camera) between the tripod head and the
camera body.
41
WWW.LENSINC.NET / WWW.CAMERA-FIX.COM