Filter
Top Products
107
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
w Electronic VR
Choose whether to use electronic VR (vibration reduction) when shooting still
pictures.
When Auto is selected, R appears on the monitor (A 6), and electronic VR is
applied depending on shooting conditions.
B Note on Electronic Vibration Reduction
• Except during slow sync mode, electronic VR will not activate when flash is used.
• If the exposure period exceeds a certain period of time, electronic VR will not function.
• The effectiveness of electronic VR decreases as camera shake increases.
• Electronic VR does not reduce the effects of subject movement.
• Saving a picture on which electronic VR is applied may take some time.
• Electronic VR will not activate when sensitivity is ISO 800 or above.
• Electronic VR and Date imprint (A105) cannot be used together.
• Electronic VR and auto flash with red-eye reduction cannot be used together.
D Electronic VR Icons in Playback Mode
Pictures on which electronic VR has been applied can be recognized by the R icon displayed in full-
frame playback mode. The Q icon appears on pictures on which electronic VR cannot be applied
(A6, 7).
D Electronic VR for Movies
To compensate for vibration while shooting a movie, go to the movie menu (A58) and enable
Electronic VR (A 58).
Auto
When all of the following conditions are met while shooting still pictures, electronic
VR is applied and the effects of camera shake are reduced.
• The flash is turned off or set to slow sync mode.
• The shutter speed is slow.
• The Continuous option is set to Single.
Off (default setting)
Electronic VR is disabled.