Filter
Top Products
149
Setup Menu
Basic Camera Setup
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (A 21) to save power. Once the camera has entered standby mode, the
power-on lamp will blink, and if no operations are performed for another three
minutes, the camera will turn off.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
C Canceling Standby Mode
Cancel standby mode and reactivate the monitor by pressing any of the following buttons.
C Note on Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• When a menu is displayed: three minutes
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62D is connected: 30 minutes
Tap F M z (Setup menu) (A139) M Auto off
• the power switch • the shutter-release button • the A button • the c button