156
Technical Notes
En_01
Error Messages
The following table lists the error messages and other warnings displayed in
the monitor, as well as the solutions for dealing with them.
Display Problem Solution c
S (blinks) Clock not set. Set clock. 107
w Battery running low. Prepare to charge or
change battery.
16
K
Warning!
Battery
exhausted.
Battery exhausted. Charge or change bat-
tery.
16
p (● blinks red) Camera cannot focus. • Refocus.
• Use focus lock.
26, 27
27
I
Warning!!
please wait for the
camera to finish
recording.
y
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automati-
cally when recording is
complete.
27
K
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect to
“write” position.
21
No card present. Pictmotion mode
selected when no mem-
ory card is inserted.
Insert memory card. 20
I
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly
inserted.
150
20
20
I
Warning!This card
cannot be read.
I
Card is not formatted.
Format card?
No
Yes
Memory card has not
been formatted for use in
camera.
Choose [
Yes
] and press
d to format card, or
turn camera off and
replace card.
21
K
Out of memory.
Memory card is full. • Choose smaller image
size.
• Delete pictures or
sound files.
•
Insert new memory card.
•
Remove memory card
and use internal memory.
89
28, 68,
72
20
21